Filter
Top Products
7
FULL TAPE
When the tape is full, the Messages indicator light flashes rapidly. The
machine answers on the 10th ring and emits a tone. To clear the tape, play
the messages and do not save them.
THE MESSAGES INDICATOR LIGHT
The following table tells you what the Messages indicator light is doing.
What the light is doing Meaning
Continuously OFF Answering machine is off.
Blinks steadily Each blink represents a message that someone
has left on the machine.
Flashes rapidly No tape inserted, tape is full or jammed, or you
haven't recorded a valid outgoing announcement.
See applicable sections throughout this manual
to correct condition.
Continuously ON Machine is ON and there are no new messages or
memos on the answering machine.
CALL SCREENING/AUTO DISCONNECT
Because the answerer automatically stops recording when any extension
phone is picked up (Auto Disconnect feature), you can screen incoming
calls. Listen as the caller leaves a message and pick up the handset (or
any extension phone) if you want to talk to that caller.
MEMO BUTTON
The MEMO button serves two purposes:
• Enables you to leave a message on the answering machine.
• Enables you to activate the Instant Replay feature, which repeats the
previous 10 seconds of the message you are playing back.