Filter
Top Products
13
ADDING A PAUSE TO THE DIALING SEQUENCE
Use the REDIAL button to insert a delay in the dialing sequence when storing
a number. For example, when you need to dial 9 to get an outside line, press
REDIAL at the point in the dialing sequence in which a pause is required.
1. Pick up the handset to get a dial tone.
2. Press the STORE button.
3. Press 9.
4. Press REDIAL to add a pause, and then dial the number.
5. Press the STORE button and then press a memory location
(A, B, C, or 1-9).
CLEARING A STORED NUMBER
1. Pick up the handset to get a dial tone.
2. Press STORE.
3. Press the REDIAL button.
4. Press the STORE button and then press a memory location
(A, B, C, or 1-9).
DIALING A STORED NUMBER
To dial numbers from memory, pick up the handset to get a dial tone.
Press the MEM DIAL (Memory Dial) button followed by the memory
location (1-9) for the number you want to dial.
DIALING THE EMERGENCY QUICK DIAL NUMBERS (A, B, C)
Because the Emergency Quick Dial buttons are the quickest to dial, you
may want to use them to store emergency numbers.
To dial one of these numbers, just press the A, B, or C button after you
get a dial tone.
CAUTION: If you make test calls to emergency numbers, remain on the line
and explain the reason for the call to the dispatcher. Also, make these calls in
off-peak hours, such as early morning or late evening.