Filter
Top Products
8
MOVING THE ANSWERING SYSTEM
1. Disconnect the phone line from the modular telephone (wall) jack.
2. Unplug the power supply from the electrical outlet.
3. Move the unit and line cords to the desired location.
4. Connect the power supply to an electrical (AC) outlet. The display shows that the
messages have not been erased.
5. Connect the phone line.
6. Reset the time/date settings or wait for the next call to set them automatically.
TELEPHONE SET UP
Default Settings
Display Contrast 3
Time/Date 12 a.m. 1/01
Local Area Code – – –
Message Length 2 minutes
Rings to Answer 4
Security Code 123
Dialing Tone
Regional Area Codes –– –
You can customize the following settings to suit
your needs.
Display Contrast Selects the display
contrast.
Time/Date Sets the time and date.
Local Area Code Sets your local area code
for Dial Back.
Message Length Sets the length of time
allowed for
incoming messages.
Rings to Answer Selects the number of
rings before the unit
answers.
Remote Access Sets your 3-digit code
used for remote access
to the unit.
Dialing Sets the phone for tone
or pulse dialing.
Regional Area Codes Sets your regional area
codes if you have
multiple area codes
where you live.