Filter
Top Products
12
Toll Saver Information
Toll Saver can save you the cost of making a call when you access your messages from
another phone:
• If you have new messages, the system answers after the 2nd ring.
• If you have no new messages, the system answers after the 5th ring.
You can hang up after the 3rd ring and save the pay telephone or long distance charge.
Setting The Incoming Message Time
This setting allows you to select the length of the incoming message.
1. The answering system announces “Message Time (current message length) minutes. To
set message time, press NEXT( 8 ), press ENTER to continue.”
2. To change the message length, press and release the ( 7 or 8 ) button and the answering
system announces a number, such as “1, 2, 3, 4.”
3. After choosing a number, press and release the SETUP/ENTER button to store the message
time. The answering system enters Security Code menu.
Setting the Security Code
This setting allows to change the factory default security code used to access your
answering system from a remote location. This menu comes after you have finished setting
the Incoming Message Time. The default code is 123.
1. The answering system announces, “Security Code (the current 3 number Security Code
setting). To set security code, press NEXT( 8 )...press ENTER to stop.”
2. If you press and release the SETUP/ENTER button, the answering system announces all the
new settings and exits the Setup menu.
3. If you press and release ( 7 or 8 ) button, answering system
announces “Security Code (current 3 number). To set security code, press NEXT( 8 ), press
ENTER to continue”.
4. To change the first security code number, press and release the
( 7 or 8 ) button again. The answering system announces all three numbers, but only the
first number will change, such as “123, 223,” or “123, 023”.
5. After choosing the first number, press and release the SETUP/ENTER button to store the first
number.