Filter
Top Products
INSTALLATION
A modular (Universal Service Order Code) USOC:
:
A. Telephone Outlet
RJIIC outlet jack (illustrated) iS required.’ - : - ‘-
ln~lation ofthis telephone in locationswith ~prong :
jack or with hard-wired outlets will require additional :
Converters (not included). The dealer from whom .
you purchased your phone or a telephone supply s
store can advise you regarding the proper tinverter. .
●
Installation Note: Some cordless telephones
~
B.
operate at frequencies that may cause interference :
to nearby TVs and VCRs; to minimize or Drevent
●
such interference,the base ofthe cordless te(ephone :
should not be placed near or on top of a ~ or VCR; t
and, if interference is experienced, moving the .
cordless telephone farther away from the TV or VCR s
will often reduce or eliminate the interference.
●
●
1. Insert antenna and screw into place.
●
●
●
●
●
2. This telephone is equipped with a Cord Wrap :
for the straight LINE TELEPHONE CORD.
●
●
This Cord Wrap is located on the bottom of :
the BASE.
●
Wrap TELEPHONE LINE CORD around cord :
wrap leaving enough of cord free to reach s
outlet jack.
●
●
●
●
●
●
3. Plug TELEPHONE STRAIGHT CORD into
●
●
Modular wall jack.
●
4
●
●
4. Plug the smaller, “U’ shaped end of the AC
ADAPTER into back of unit.
AC POWER SUPPLY CORD must be fed
through the STRAIN RELIEF on bottom of
base to prevent cord slippage. (see inset).
Note: Use only GE AC ADAPTER and
POWER SUPPLY CORD Model #5-2346 with
this product.
Requirements
Quick Set-up
/
,-
{’”
/
/
,
/’
,/’
,/
‘
●
8
..