Filter
Top Products
INSTALLATION - WALL MOUNTING
1. Turn telephone cradle over and ,4
4A
Dush release door off in direction ~~
I*
II
2.
3.
4.
5.
6.
7.
of
arrow. Remove CRADLE
BOTTOM.
Locate CORD WRAP POST and
unwrap CORD completely from
base.
Feed plug and about 2 inches of
straight cord thru hole in CORD
WRAP POST
Wrap remaining straight CORD
around CORD WRAP POST
leaving enough to go down and
through the restrainer at the coiled
cord end of the cradle.
Attach cradle bottom to CRADLE
TOP. Be sure the coiled cord
aligns with the CO/~~D CORD
graphics on the underside of
the CRADLE TOP. Replace
release door to secure cradle.
NOTE: There is only one
configuration in which the
halves fit together properly.
Connect coiled end of CORD to
~A~DS~Tand then, plug straight
end of cord in wall phone modular
jack.
Slip CRADLE
over WALL PMTE
You are now ready to try your new telephone.
/
f<
‘
,/
,/
/’
,/’
*
,*
..