Filter
Top Products
9
TO SET YOUR LOCAL AREA CODE
The telephone uses the programmed area code to
determine the number format to display when a valid
Caller ID signal is received and is also used for the
Dialback feature.
1. Press and hold the REVIEW up button then press and
hold the REVIEW down button. Continue to hold both
buttons for 3 seconds.
SETUP MENU ^ v
appears.
2. Press the REVIEW up button until
LOCAL AREA
CODE
appears.
3. To enter or change the area code, press the DELETE
button. The display shows the present area code
stored. The left-most digit or a minus sign (-) flashes,
indicating it is ready to accept the area code entry.
4. Press REVIEW down to choose 9-0 for the first digit.
5. When the desired digit is flashing, press REVIEW up to
advance to the next digit.
6. Repeat steps 4 and 5 until all the digits for your area
code are correct.
If you make a mistake, you can simply retrace the
previous steps until your area code is set.
7. Press DIAL to store the area code and return to the
LOCAL AREA CODE
display.
TO SET THE CID DISPLAY LANGUAGE
This adjustment changes the Caller ID prompts to be
displayed in English, French or Spanish.
1. Press and hold the REVIEW up button then press and
hold the REVIEW down button. Continue to hold both
buttons for 3 seconds.
SETUP MENU ^ v
appears.
2. Press the REVIEW up button until
CID LANGUAGE
appears.
3. Press the DELETE button to show the current language
setting. The default is English.
4. Press REVIEW up or down to change the language.
5. Press DIAL to store the language and return to the
CID
LANGUAGE
display.