Filter
Top Products
20
TO CHANGE A STORED NUMBER
Repeat the storage sequence. The new number replaces
the old number at the memory location.
TO ERASE A STORED NUMBER
1. Pick up the handset.
2. Press STORE.
3. Press STORE again.
4. Press the location (A, B, 0-9) to be erased.
TO DIAL A QUICK DIAL NUMBER
1. Pickup the handset.
2. Press the Quick Dial location A or B. The number dials
automatically.
TO DIAL FREQUENTLY CALLED
NUMBERS
1. Pick up the handset.
2. Press DIAL.
3. Press 0-9 for the memory location. The number dials
automatically.
TO USE PAUSE (REDIAL)
The REDIAL button becomes a pause function when the
STORE button has been pressed first. It is valid only when
storing a number into memory locations.
Use the PAUSE (REDIAL) button to insert a pause when a
delay is needed in an automatic dialing sequence. For
example, when you must dial a 9 to get an outside line or
when you enter codes to access you long distance
company.
You may need to adjust the length of the pause duration. It
can be adjusted from 1 to 9 seconds. The default setting is
4 seconds.
1. Pick up the handset.
2. Press the STORE button.
3. Press 1-9 (1=1 second, 2=2 seconds, etc.)
4. Press STORE again.
5. Press the PAUSE (REDIAL) button to save.