48
The following indicators show the status of a message or of the unit.
The person is calling from a name or number that has been
blocked from transmission.
Indicates the system is busy and not able to connect to the
system.
Indicates a call is waiting on the line.
Prompt asking if you want to erase all Caller ID records.
Prompt asking if you want to erase the current Caller ID record
that is shown on the display.
Prompt conrming the Caller ID record is erased.
Prompt telling you to enter the name in one of the 50 memory
locations.
Prompt telling you to enter a telephone number in one of the 50
memory locations.
Caller information has been interrupted during transmission or the
phone line is excessively noisy.
Indicates the battery pack needs charged.
Indicates no calls have been received.
No Caller ID information was received.
The page button on the base has been pressed.
Indicates the CID number is a Direct Dial Number (DDN) and
cannot be formatted.
The incoming call is from an area not serviced by Caller ID or the
information was not sent.
Signal Meaning
A long warbling tone (with ringer on) Signals an incoming call
Three short beeps Page signal
One short beep (every 7 seconds) Low battery warning