GE 28165xx6 Cordless Telephone User Manual


  Open as PDF
of 60
 
31

Press the  (SKR) to put a call on hold. LX ON HOLD shows in the display, where X is the
line number.
To take a call off hold, press the  (SKR).
• To switch a call on hold from the base to the cordless handset, press
, 
or  button on the handset.

This feature helps you locate a misplaced handset.
Press and release the  button on the base. A list of registered handsets
show in the display, use the
5 or 6
buttons to select the unit you wish to page, and press
 (SKL) to conrm. The cordless handset beeps intermittently and displays PAGING
FROM BASE for about two minutes or until you press (SKL) on the handset or press
 on the base.



If one or more handsets become lost, you should de-register all handsets to ensure proper
system operation. Follow the steps below to de-register all handsets at the same time.




1. Unplug the power from the unit.
. Press and hold the
 button.
3. Plug in power.
4. Press and hold the
 button until the Charge / In-Use indicator blinks.
Release.
5. Press the
 button again and the Charge / In-Use indicator will blink
rapidly.
6. A conrmation tone is emitted if de-registration procedure if successful, and all
handsets display PLEASE REGISTER HANDSET. Press .
 previous next