Filter
Top Products
28
5. Use the number keys to enter the time and use or button
to select AM or PM.
6. Press the Store (SKL) button to save the setting. You will hear a confirmation tone.
Set Area Code
If you enter your local 3-digit area code in the area code menu, your local area code
does not display on the Caller ID (CID) list. Instead, you only see the local 7-digit
number. Calls received from outside your local area code will display the full 10-digits
From the Phone Setting menu:
1. Use the or button to scroll to Set Area Code.
2. Press the Select (SKL) button to enter the menu.
3. Use the number keys to enter your 3 digit area code. “ - - - “ is the default setting.
4. Press the Store (SKL) button to save the setting. You will hear a confirmation tone.
NOTE: To restore the default setting to “---”, press and release the
DELETE/FLASH button when Set Area Code shows on the display.
Handset Name
This menu allows you to enter a name for the handset, which displays on the idle
screen.
From the Phone Setting menu:
1. Use the or button to scroll to Handset Name.
2. Press the Select (SKL) button to enter the menu.
3. Use the number keys to enter a name (up to 15 characters). More than one letter
is stored in each of the number keys. For example, to enter Bill Smith, press the
2 key twice for the letter B. Press the 4 key 3 times for the letter I. Press the 5 key
3 times for the letter L. Wait for 1 second, press the 5 key 3 times for the second
letter L, and press the 1 key to insert a space between the first and last name.
Press the 7 key 4 times for the letter S; press the 6 key once for the letter M; press
the 4 key 3 times for the letter I. Press the 8 key for the letter T; press the 4 key
twice for the letter H.
4. Press the Store (SKL) button to save your selection. You will hear a confirmation
tone.
NOTE: If you make a mistake, use the DELETE button to backspace
and delete one character at a time.