Filter
Top Products
9
TELEPHONE SETUP
REGISTRATION
You must register both handsets before use.
a) 1st handset - The 1st handset being charged on the main base station will automatically
registered after 16 hours’ charging.
b) 2nd handset - After the 2nd handset has been charged for 16 hours on its charging cradle,
place it on the main base station for 20 seconds, it will then automatically register.
NOTE: In case of a power failure of more than 5 minutes, you must put both handsets
on the main base cradle for 20 seconds to re-register again.
REDIAL (button)
FLASH/call wait (button)
TONE*/exit (button)
MUTE (button)
ringer on/off (switch)
PAUSE# (button)
display
TALK/call back
(button)
CHAN/delete
(Channel/delete button)
MENU (button)
SELECT/TRANSFER (button)
SPEAKER (button)
CID/VOL +
(
Caller ID/Volume + button)
CID/VOL -
(
Caller ID/Volume - button)
EXTRA CHARGING CRADLE
1. Plug the extra charging cradle into an easily accessible electrical outlet.
2. Place the handset on the charging cradle.
3. The charge indicator turns on, verifying the battery is charging.
4. Allow the phone to charge for 16 hours prior to first use.
HANDSET LAYOUT