51
ANSWERING SYSTEM DISPLAY MESSAGES
0-59 Total number of messages.
CL (blinking) The voice time/day stamp needs set.
-- Answerer off.
An (blinking) Currently answering a call.
F (blinking) Memory is full.
LA (Line Access) External line remote answerer.
(blinking) Recording Announcement or memo.
HANDSET SOUND SIGNALS
Signal Meaning
A long warbling tone (with ringer on) Signals an incoming call
Three short beeps Page signal
One short beep (every 7 seconds) Low battery warning
TROUBLESHOOTING GUIDE
TELEPHONE SOLUTIONS
No dial tone
• Check or repeat installation steps.
• Make sure base power cord is connected to a working electrical outlet.
• Make sure the telephone line cord is connected to the base and the
modular phone jack.
• Connect another phone to the same jack; if there is still no dial tone, the
problem might be your wiring or local service.
• The cordless handset may be out of range of the base. Move closer to
the base.
• Make sure the battery is properly charged (16 hours).