Filter
Top Products
30
STORING A NAME AND NUMBER IN MEMORY
1. Make sure the phone is OFF (not in TALK mode).
2. Press the mem button.
3. Press the desired memory location button (01 through 50) or, use the
cid/vol ( or ) button on handset to select the memory location. If the
memory location is occupied, the memory location and stored name
and number appear in the display. If the memory location is empty,
EMPTY
shows in the display.
4. Press the mem button. The display shows
ENTER NAME
.
NOTE: If you don’t want to enter a name, skip step 5.
5. Use the touch-tone pad on your handset to enter a name (up to 15
characters). More than one letter is stored in each of the number keys.
For example, to enter Bill Smith, press the 2 key twice for the letter B.
Press the 4 key 3 times for the letter I. Press the 5 key 3 times for the
letter L. Wait for 1 second. Press the 5 key 3 times for the second letter L,
and press the 1 key to insert a space between the first and last name.
Press the 7 key 4 times for the letter S; press the 6 key once for the letter
M; press the 4 key 3 times for the letter I; press the 8 key for the letter T;
press the 4 key twice for the letter H.
ENTER NAME
#
MEMO
0 3
* *
EMPTY
* *
#
MEMO
0 3
SELECT MEMORY
01‐50
#- -
MEMO