Filter
Top Products
14
NOTE: If you make a mistake, use the delete/flash button to backspace and
delete one character at a time.
3. Press the MUTE/program button to save your name. You will hear a
confirmation tone.
AREA CODE
1. Press the MUTE/program button to go to the SET AREA CODE menu.
The default is - - -.
2. Use the touch-tone pad to enter your 3 digit area code.
3. Press the MUTE/program button to save your selection. You will hear a
confirmation tone.
NOTE: Press the EXIT button once to keep the previous setting and return to
the standby screen.
RINGER TONE
You may choose from six different ringer tones.
1. Make sure the ringer is turned on. See Ringer On/Off section.
2. Press the MUTE/program button to go to SET RINGER TONE menu.
3. The default ringer tone is set to ringer tone 1.
4. Use the touch-tone pad to enter a ringer tone number (1 through 6) , or use
the cid/vol (up or down arrow) button to scroll to the desired setting. You
will hear a sample of the ringer tone you select.
5. Press the MUTE/program button to save your selection. You will hear a
confirmation tone.
NOTE: Press the EXIT button once to keep the previous setting and return to
the standby screen.
TONE/PULSE
Most telephone systems use tone dialing, however, some may still use
pulse dialing. This system is pre-set to tone dialing. Depending on your
service type, set the dialing mode as follows: