Filter
Top Products
10
ADVANCED FEATURES
CHANNEL
button
RINGER
OFF ON
VOLUME
CHANNEL
FLASH
321
DEFABC
JKL MNO
GHI
TUV WXY
465
987
PRS
TONE OPER
#
*
0
MEMORY
REDIAL
PHONE
MEMORY button
CHANNEL BUTTON
While talking, you might need to manually change the
channel in order to get rid of static. Press and release the
CHANNEL button to advance to the next clear channel.
THE MEMORY FEATURE
Store up to 10 numbers in memory for quick dialing.
STORING A NUMBER IN MEMORY
The phone must be OFF when you store numbers.
1. Press the MEMORY button.
2. Dial the number (up to 16 digits).
3. Press MEMORY and then press a number key (0-9) to
store the dialed number in that memory location.
4. Record whose number is stored in the location on the
memory directory card on the back of the handset.
INSERTING A PAUSE IN THE DIALING SEQUENCE
Press the FLASH button to insert a delay in the dialing
sequence of a stored telephone number when a pause is
needed to wait for a dial tone (for example, after you dial
9 for an outside line or when you need to wait for a com-
puter access tone). Each pause counts as 1 digit.
IMPORTANT: If you make test calls to emergency numbers stored in
memory, remain on the line and briefly explain the reason for the call to the
dispatcher. It's a good idea to make these calls during off-peak hours, such as
early morning or late evening.
CHANGING A STORED NUMBER
Use the same procedure you use to store a number.
D
IALING
A
S
TORED
N
UMBER
1. Make sure the phone is ON.
2. Press MEMORY, and then press the number for that memory location.