Filter
Top Products
36
If there is an error in the transmission of information to your Caller ID phone, ERROR
shows in the display.
If you have not subscribed to Caller ID service or it is not working, NO DATA shows in
the display.
This section explains two types of remote access: using the cordless handset to access
the answering system and accessing the answering system from another phone.
You may access the answering system on the base with the handset buttons.
You may also access your answering system from any touch-tone phone by entering
a 3-digit security code after you hear the outgoing announcement. A voice menu
system guides you through the steps.
Press the button to access the answering system.
After you access the answering system, use the marked handset keys just as if
you were pressing the corresponding buttons on the base (see “Answering System
Operation” for details on functions). To make it easy for you, the functions are listed
on the handset above each number. For example, to play messages:
1. Press the
button.
. Press the
() and mailbox number.
3. When you are nished listening to your messages, press
again to quit, or you may listen to the voice menu at
any time by pressing 7.
The answering system is active by default. The display will show ANSWERER OFF
when the answering system is turned off.
When the answering system’s memory is full, the system answers after 10 rings,
beeps, and waits for you to enter the 3-digit security code. You have 10 seconds to
enter the security code before the phone hangs up.