Filter
Top Products
40
CHANGING THE SECURITY CODE
The default security code for accessing the answering system from
another location is 1 2 3.
The security code is set through the programming menu. Refer to
Telephone Set Up for more information.
CHANGING THE BATTERY
Make sure the telephone is OFF (not in TALK mode) before you replace battery.
1. Remove the battery compartment cover.
2. Disconnect the battery plug from the jack inside the battery
compartment and remove the battery pack from the handset.
3. Insert the new battery pack and reconnect the battery plug to the jack
inside the compartment.
4. Put the battery compartment cover back on.
5. Place handset in charge cradle to charge. If you don’t charge the
handset battery properly (for 16 hours) when you first set up the phone
and/or when you install a new battery pack, the battery’s long-term
performance will be compromised.
NOTE: If the battery is not properly installed in the handset, or if the battery
pack is not properly connected to the jack inside the battery compartment,
“NO BATTERY” flashes in the display.
BATTERY SAFETY PRECAUTIONS
• Do not burn, disassemble, mutilate, or puncture. Like other batteries of
this type, toxic materials could be released which can cause injury.
• Keep batteries out of the reach of children.
• Remove batteries if storing over 30 days.
CAUTION: To reduce the risk of fire or personal injury, use only the
battery listed in the instruction book.