Filter
Top Products
17
4. Press the flash/prog button on the handset until
LINK BASE?
shows in
the display. “
NO
” is the default setting.
5. Press caller ID/vol (- or +) button on the handset to scroll to
YES
.
6. Press flash/prog on the handset again to confirm. You will hear a long
confirmation tone when the handset is successfully linked to the base.
DEFAULT SETTING
NOTE: This setting may be made with the base or the cordless handset.
1. Press the program/flash button on base or flash/prog button on handset
until
DEFAULT SETTING
or
DEFAULT
shows in the display.
“NO”
is the
default setting.
2. Use the touch-tone pad to select 1YES or 2NO, or press the caller ID (rev
or skip) button on the base or caller ID/vol (- or +) button on the handset
to scroll to YES or NO.
NOTE: If you choose “YES ” all settings in the programmable menu return to
factory defaults except day and time.
3. Press the program/flash button on base or flash/prog button on handset
again to store your selection.
BASIC OPERATION
ANSWERING A CALL
Check the display to see who is calling.
NOTE: You can only use one handset at a time. "UNAVAILABLE" will be
displayed if other handset is in use.
CORDLESS HANDSET
1. Press the talk/end/call back button on the handset.
2. When finished, press talk/end/call back or place the handset in charging
cradle to hang up.
CORDED HANDSET
1. Lift the handset.