Filter
Top Products
14
repeat steps 4 and 5. After the third number is stored, the answering system
announces all the stored settings and exits the setup menu.
NOTE:
User can exit the set-up menu at any time by pressing the STOP
button.
Reviewing the Settings
This function allows you to review the current time, rings to answer, message time
and security code.
• Press and release the SETUP/ENTER button to start the review. The answering
system announces the current settings.
Adjusting the Volume
Use the VOLUME + and - buttons to increase or decrease the volume. The
answering system beeps when it is not announcing a setting or playing a
message.
Message Counter
The message counter displays the number of messages you have received.If the
answering system is off, the message counter displays a dash (-). If the answering
system is on, the message counter displays the number of messages.
Less Than 10 Messages
When you have new messages, the message counter continuously flashes the
number of new (from 1 to 9), unheard messages in the display.
When you have no new messages, the message counter displays the number of old
messages (from 0 to 9).
When you have both new and old messages, the message counter continuously
flashes the total number of messages (from 1 to 9) in the display.