Filter
Top Products
13
Setting The Incoming Message Time
This setting allows you to select the length of the incoming message.
1. The answering system announces “Message Time (current message length)
minutes. To set message time, press NEXT ( 8 ), press ENTER to continue.”
2. To change the message length, press and release the ( 7 or 8 ) button and the
answering system announces a number, such as “1, 2, 3, 4.”
3. After choosing a number, press and release the SETUP/ENTER button to store the
message time. The answering system enters Security Code menu.
Setting the Security Code
This setting allows you to change the factory default security code used to access
your answering system from a remote location. This menu comes after you have
finished setting the Incoming Message Time. The default code is 123.
1. The answering system announces, “Security Code (the current 3 number Security
Code setting). To set security code, press NEXT ( 8 )...press ENTER to stop.”
2. If you press and release the SETUP/ENTER button, the answering system
announces all the new settings and exits the Setup menu.
3. If you press and release ( 7 or 8 ) button, answering system
announces “Security Code (current 3 number). To set security code, press NEXT(
8 ), press ENTER to continue”.
4. To change the first security code number, press and release the
( 7 or 8 ) button again. The answering system announces all three numbers, but
only the first number will change, such as “123, 223,” or “123, 023”.
5. After choosing the first number, press and release the SETUP/ENTER button to
store the first number.
6. The answering system automatically advances to the second number and
announces “Security Code (current 3 number). To set security code, press NEXT
( 8 ), then press ENTER to continue.” To change the second and third numbers,