Filter
Top Products
24
3-2-2. Transmitting
1. Select the desired mode (International or USA) by pressing the [INT] key. Each time the key is pressed,
the mode changes to INT or USA, and "INT" or "USA" appears on the LCD.
2. Select the desired channel by rotating the Channel selector.
3. To set the transmitter to high or low power, press [1/25]/DIM key and release within 1 second.
This alternately changes the transmitter output power from 1 watt ("LOW" appears) to 25 watts ("LOW"
disappears).
Transmit at low power for short range communications or when in harbor areas, to minimize interference
to others.
Note: The following channels are automatically set to low power (1 watt):
USA: 13*, 17, 67*, 77
* Channels 13 and 67 can be switched to high power (25 W) if [1/25]/DIM key is pressed while [PTT]
switch is on.
Transceiver is designed not to transmit on US channel 15.