Filter
Top Products
8
Receiving All Records from the PC
1. Press (Time) on your handheld Organizer
until the Home Time screen appears.
2. Click File | Export to Organizer on the menu bar of
your PC Sync.
Verify the model and COM port information.
3. Press Sync on your unit to enter the data
communication mode.
4. Use
or to select
3-RX
or press 3 and then
press ENTER to start receiving the data.
5. Click the Export button on the PC to start the
transmission of data.
Transmitting or Receiving Records
Password Protection: You can set or change
your password in your PC Sync by clicking on
File|Password and entering a numeric password
of up to 6 digits. It is recommended that your write
your password down and keep it in a safe place.
WARNING: If you lose your password you will
have to reset your unit and you will lose all your
data.
You can change or remove your password at any
time. Click on File|Password and enter your
password in the
Change Password for Folder
dialog box. In the
New Password for Folder
dialog
box, enter a new password and verify it to change
your old password, or click OK to remove your
existing password.
RFPC-07.Eng 10/24/01, 3:13 PM8