Filter
Top Products
3
Connecting the Serial Cable
Before you can transmit or receive records you need
to do the following:
1. Turn your personal computer
off.
2. Connect the 9-pin plug of the
Organizer PC Sync cable into a
free communications (COM)
port.
3. Connect the single-pin plug of the cable into
the PC PORT hole on the left side of your
organizer.
Confirming the Configuration of the
Organizer Software
On your PC, go to Start|Programs|PC Organiser and
click PC Organiser.
Note: Make sure the model number displayed on the
title bar matches the model number on your Rolodex
unit. If the model number does not match do the
following:
1. Go to File|New and re-name the existing Folder.
You may select any name of your choice. Please
type the name without spaces.
2. Select your model number from the drop-down
menu under Model.
3. Click OK.
Transmitting or Receiving Records
RFPC-07.Eng 10/24/01, 3:13 PM3