Filter
Top Products
Description
DT29214
15 Keypad
16 Handsfree
Activate handsfree speaking. See sections “Incoming Calls” on
page 23, “Outgoing Calls” on page 26 and “During Calls” on
page 48.
17 R/Message
Put call on hold (inquiry), take call off hold or enter the message
system. See section “During Calls” on page 48.
18 Accessory connectors
See section “Installation” on page 86.
19 Loudspeaker (rear side)
For handsfree speaking function. See sections “Incoming Calls” on
page 23, “Outgoing Calls” on page 26 and “During Calls” on
page 48.
Phone signals
The cordless phone is signalling certain events audibly and visually
as described below.
The cordless phone also generates audible ring signals, alarm
signals and warning tones, and key clicks.
Signal Meaning
Red warning light Incoming call
Message waiting
Battery almost empty
Cordless phone out of range or not connected
Sound Meaning
Ring signal Incoming call
Alarm signal 4 short beeps every 30 seconds: battery almost
empty
4 short beeps every 2 minutes: Cordless phone
out of range or not connected
Key click You hear this each time you press a key (when
selected). See section “Key Sound” on page 81.
Warning tone You have pressed a key which has no function.