Filter
Top Products
LTR FEATURES
40
following illustration. The monitor mode can also be enabled by the MON
or CG option switch if it is programmed. Refer to the monitor mode
description on page 44 for more information.
LTR FEATURES
Standard and Telephone Calls
Standard calls are between two mobiles or between a mobile and a
control station. Telephone calls allow you to place and receive calls over
the public telephone system using your transceiver. Standard calls are
described starting on page 19, and telephone calls are described starting
on page 21.
Calls on Priority and Block ID Codes
Two fixed priority and a block of receive ID codes can be
programmed. These codes are in addition to the receive and transmit ID
code selected by the group select function. Calls on the fixed priority and
block ID codes are received regardless of which group is selected or
group scanning. All that is required is that the system programmed with
those codes be selected or scanned.
Calls on the fixed priority ID codes have a higher priority than calls
being received on other ID codes. If a call with a higher priority is
detected while receiving a call, the current call is immediately dropped
and the higher priority call received. Telephone calls are not interrupted
by priority calls.
Monitor Mode
Selected