Filter
Top Products
ELF™
4
4.3.2 Imager Data Capture
The Elf Imager captures a picture of the entire bar code. The omni-directional
scanning does not require that the operator orient the bar code to align with the
scan pattern.
To read a 1D or 2D code, simply point the Elf Imager model onto the code and
press the SCAN Key.
The Elf Imager uses an intelligent aiming system pattern, similar to those on
cameras, indicating the field of view, which should be positioned over the code:
Aiming System
If the aiming system pattern is centered over the entire symbology as shown in
the following figure, either wait for the timeout or release the Scan key to
capture the image.
A red beam illuminates the code, which is captured and decoded. You will get a
good read.
34