Filter
Top Products
6.
Coding the receiver:
1. Open the receiver case by inserting a small screwdriver into one of the pry notches on
the side of the case. (refer to receiver manual)
2. Gently lift o the front cover.
3. Locate the eight dip switches on the receiver and make sure they are set identically
to dip switches 1-8 on the transmitter.
Note: If more than one transmitter is used with the receiver, the first eight dip switches
of all transmitters must match the eight dip switches of the receiver.
Note: Whenever a change is made to the time jumper or the dip switches, the receiver
must be turned OFF and then back ON to operate properly.
Frequency: 433.92 MHz
Operating range: -30˚F to 110˚F
Battery life: 6-12 months