Filter
Top Products
HANDSET Controls
1. OGCall (Outgoing call) button (
): Press and to view the last outgoing call
number(see page 22 for detail)
2. Voice Mail/Menu (Manual) Button: (Voice Mail) Press to automatically dial the Voice
Mail Post Code in your area to access your Voice Mail message. (Menu)Press to access
the special functions operation in STANDBY mode. (For special functions see pages
23~28. )
3. Scan/Del (Delete) Button: (Scan) Press to change the operating channel when you
hear interference. (Del) Press to delete items or individual characters.
4. Flash/Edit Button: (Flash) Press to answer a call if you have Call Waiting. (Edit) Press
to edit listed items.
5. HEADSET JACK: For connecting your headset plug to enjoy hands-free
communication. (See page 13 for detail.)
6. TELEPHONE KEYPAD Buttons: Allows you to make a call depending on pressed
button. (For TELEPHONE KEYPAD characters, see page 19.).
7. Temporary Tone (*) Button: Press to temporarily change the DIALING mode from
PULSE to TONE for Rotary Service Users. (Press once before entering numbers to
access the answering system or electronic banking services, etc.).
8. New Call/Msg Waiting ( Message Waiting ) LED Indicator: (New Call) Red LED
blinks to indicate that you have a new Caller ID call stored in memory. (Message
Waiting) Green LED blinks when receiving a Message Waiting signal, if you have
subscribed to a Voice Mail message service from your local telephone company.
(See page 15.).
9. Large LCD Screen: Shows call information, phone status, prompts and
DIRECTORY (PHONE BOOK) items.
10. Vol (Volume) button(
): During TALK mode, press to adjust the receiver volume to
a comfortable listening level. (see page 13 for detail)
11. Dir (Directory)/ESC (Escape) Button: (Dir) Press to access names and numbers
stored in the DIRECTORY (PHONE BOOK) (See pages 18 to 22 for details.).(Esc)
Press to cancel the ongoing operation and return to STANDBY mode.
12. SCROLL UP
- DOWN Button: Press to move around the large LCD Screen.
Trans (Transfer call) button(
): Press to transfer a call from this Handset to
another enrolled in the system (see page 29 for detail)
13. Re (Redial)/Pa (Pause)/Save Button: (Re) Press to redial the last number you dialed.
(Pa) Press to insert a pause while dialing. (You will need the Re/Pa/Save button to dial
numbers which use an alternative Long Distance Access Code.) (Sa) Press and hold
down to save the changes on the listed items.
14. Talk Button: Press to answer an incoming call or to place a call. Press to end a call.
6