Filter
Top Products
J. Deleting Message Waiting Indication
1. Press the Voice Mail/Menu button to enter the menu.
2. Press the 0 button
or press the SCROLL DOWN button 10 time to go to the
MESSAGE WAITING programming option. “MSG WAITING ON” will display
in LCD
Total
11
MSG WAITING
ON
10
#
Total
11
MSG WAITING
ON
10
#
3. Press the Flash/Edit button to reset the Message Waiting Indication. “MSG
WAITING OFF” will be displayed in LCD and the “OFF” will flashing.
4. Press and hold the Re/Pa/Save button to delete the indication. A long “beep”
will sound to confirm the setting has been saved.
5. Continue with programming or press the Dir/Esc button to return to
STANDBY mode.
NOTE: Only Message Waiting in “ON” mode can delete the indication to “OFF” mode, if
the mode is “OFF”, no need this operation..
K. Setting the Area Code
1. Press the Voice Mail/Menu button to enter the menu.
2. Press the * button
or press the SCROLL DOWN button 11 time to go to the AREA
CODE programming option.
3. Press the Flash/Edit button to change the setting. “000” will begin flashing.
4. Press the TELEPHONE KEYPAD 0 to 9 buttons to enter the three digit area
code for your phone number.
5. When the desired setting is displayed, press and hold the Re/Pa/Save button
to save the setting. A long “beep” will sound to confirm the setting has been
saved.
6. Press the Dir/Esc button to return to STANDBY mode.
NOTE:
Do not use the AREA CODE programming if you are required to dial 10 digits
(XXX-XXX-XXXX) to dial a local number.
Caller ID System Operation
28