Filter
Top Products
Introduction
12 Comdial May ‘04
1.2 Making the Connections
The connectors for attaching your EP300 to the network are located
on the underside of the instrument. Here you will also find con-
nectors for attaching the power supply and an optional headset. You
can also connect a cable from the EP300 to your PC so that both
devices can operate with a single network cable. The following
diagram shows the cable connection locations.
Note: Some types of network equipment can provide the power for
the EP300 instrument through its Ethernet connection. In those
instances, the external power supply is not required.
Caution: Do not connect this jack directly to a central
office line.
To LAN
connection
To PC
To Handset
To Headset
Power