Vertical Communications FX Series Conference Phone User Manual


 
3.3.1 Using The Automatic Redial Feature
If your station has the multiple automatic redial feature enabled, you can
place up to 10 numbers in your telephone’s redial queue. Your telephone
will redial the numbers one at a time, in the order you placed them in the
queue, until (a) the call is answered, (b) you cancel the automatic redial
feature for a particular number, or (c) your telephone has dialed the
number a preprogrammed number of times (set by your system installer).
To use the automatic redial feature to redial a busy or
unanswered number,
1. While on the call, press ARDL or press the AUTOMATIC
REDIAL button programmed by your installer.
2. The system repeatedly dials the number until you cancel the
feature or the system has dialed the number a preprogrammed
number of times (determined by your system installer).
3. The AUTOMATIC REDIAL light flashes between redials and
turns on steady during redialing.
4. When the distant party answers the call, press the ARDL button or
the AUTOMATIC REDIAL button while on the call to cancel
automatic redialing,
—OR—
if your installer has enabled answer supervision on your line, the
system automatically cancels automatic redialing and turns the
AUTOMATIC REDIAL light off.
5. If your system installer has enabled the redial multiple numbers
feature, you can have up to 10 numbers in your redial queue. To
add numbers to your redial queue, repeat step 1 in the above
procedure.
To scroll through numbers in your redial queue if your telephone
is currently idle,
1. Press the ARDL button or the AUTOMATIC REDIAL.
The display shows the last number dialed.
2. To remove the number from the redial queue, press REMOVE,
—OR—
to scroll to the next number in the queue, press NEXT,
—OR—
to exit from the redial queue, press EXIT.
Making Calls GCA70–258
3 – 4 LCD Speakerphone Station User's Guide