Filter
Top Products
Using The Other
Telephone Features
7.1 Using The Recall/Flash Feature
Your host system provides certain features that you can access from your
telephone. Your system will probably be configured so that pressing TAP
results in a flash signal to allow access, through dialed codes, to these
features.
•
If your system has been configured for flash,
1. Press TAP to generate a timed flash signal while on line.
•
If your system has been configured for recall,
1. Press TAP while on line to disconnect you from the current
call and return dial tone to your station.
7.2 Making a Paging Announcement
•
To send a paging announcement,
1. Lift handset and listen for intercom dial tone.
2. Dial 70–77 for zones 1–8 (in the default mode, zone 1—code
70—provides an all-call function).
3. Make announcement.
4. Remain on line if awaiting a reply (known as a meet-me page),
—OR—
hang up handset.
7
GCA70–251 Using The Other Telephone Features
Single Line Station User's Guide 7 – 1