Filter
Top Products
Answering Calls
16 Comdial October, 02
• When you hear outside ringing (two long bursts) and
observe a red flashing light,
1. Press the flashing line button or Select Answer.
2. Speak toward telephone or lift the handset if privacy is
desired.
3. Select Do Not Disturb if you do not wish to answer the call
at this time.
2.1.1 USING CALL HANDLING BUTTONS
• After you have answered an outside call at your station, your
LCD will display HOLD, TRANSFER, CONFERENCE,
GROUP LISTEN, and RECORD
1. Select Hold to place the call on hold at your station, or
2. Select Transfer to initiate a transfer to another station, then
dial the station number, announce the call or hang up to com
-
plete the transfer, or
Figure 2-2 Selecting Hold, Transfer, or Conference
3. Select Conference to initiate a conference call.
NOTE: For more information on setting Do Not Disturb at
your station, see section titled Do Not Disturb Condition on
page 87.