Filter
Top Products
7.6 Setting A Do Not Disturb
Condition At Your Station
The Do Not Disturb (DND) feature keeps calls from ringing at your
speakerphone, and makes your station appear busy to intercom calls. If
your installer has programmed your station to have this feature, you can
enable it as needed.
Generally, callers cannot override this feature. They hear two quick tone
bursts every two seconds when they call a telephone that is set to DND
mode. However, the installer may program some telephones with the
ability to override a do not disturb condition at another telephone.
You can program a permanent do not disturb button to provide yourself
with quick access to this feature if you wish. See the programming
section of this user’s guide for details.
• To enable DND,
1. Press preprogrammed DND button. The light associated with the
DND button turns on when the feature is active.
• To disable the DND condition,
1. Press preprogrammed DND button. The light associated with the
DND button turns off when the feature is disabled.
• To set a do not disturb condition at your telephone when a call
rings at your station,
1. Hear ringing.
2. Press DND button. Ringing will stop, caller will hear the do not
disturb tone, and your telephone will remain in DND until you
disable the feature (described above).
GCA70–313 Using The Other Telephone Features
Station User's Guide 7 – 5