Vertical Communications 8112S Telephone User Manual


 
7.10 Using The IMIST Module
Impact SCS 8212S and 8212N telephones equipped with the optional
IMIST module can support an IST device (modem, FAX machine,
industry-standard telephone, etc.) in addition to the telephone.
Depending on system programming, you can use the IST device to make
outgoing calls and receive incoming calls.
The functionality of the IMIST module depends on the type of system
you are using and the type of digital station board and memory board
your system has. (See your installer for complete details.)
The IMIST module will function on a DXP system with the
appropriate digital station board, but the IMIST module will not have
its own extension number and will not function simultaneously with
the speakerphone.
On a DXP Plus system, the IMIST module will function
simultaneously with the speakerphone and have its own extension
number if your system has the appropriate digital station board and
memory board. If your system does not have the optional enhanced
memory board, the IMIST module will function like the one on the
DXP system described above.
On an FX Series system, the speakerphone and IMIST module can
function simultaneously and the IMIST module has its own
extension number.
NOTE: The IMIST module does not provide voltage to light a message
waiting light. Message waiting lights on devices plugged into
the IMIST module will not function
If you have any other questions about IST devices, refer to GCA70–237,
Industry-Standard Telephone Station User’s Guide.
NOTE: The IMIST module has a separate power supply. The wall
transformer is a UL and CSA approved Class 2 device operating from
120 Vac, 60 Hz, 16 watts and provides an output of 24 Vac at 450 mA.
For replacement, order Comdial P/N DIU-PTR.
scs04
P
ower
IST Device
IMIST Device
Using The Other Telephone Features GCA70–313
7 – 10 Station User's Guide