Vertical Communications 8112N Telephone User Manual


 
3.6 Waiting For A Line (Queuing)
If all the lines in a line group are busy, you can place your telephone in a
queue to await an idle line. When you share a line with another telephone
and the line is busy, you can place your telephone in a queue to await the
idle line.
To queue for a line group,
1. Lift handset or press INTERCOM.
2. Dial the line group access code.
3. Dial 6.
If you have line appearance for a particular line and wish to
queue for it,
1. Note the busy status light (LED).
2. Lift handset or press INTERCOM.
3. Dial 6.
4. Press line button.
When line group is free, your telephone sounds several short tone bursts.
When you hear this, lift handset, hear dial tone, and place call.
To cancel line group queuing,
1. Lift handset or press INTERCOM.
2. Dial #6and hang up.
3.7 Making Intercom Calls
You can dial an intercom extension manually from the dial pad or
automatically using a direct station select (DSS) button you have
programmed. There are two methods for making an intercom call. One
causes the called telephone to ring. The other causes your voice to sound
out at the called telephone. Your installer can set the system to deliver
either tone-first or voice-first calling, although all systems have tone-first
as the default condition.
Keep in mind that whatever the system setting, a called party can set a
voice announce block condition at his or her telephone to prevent all
voice announce calls. Furthermore, if he or she blocks voice announce,
the system also blocks SOHVA calls.
Making Calls GCA70–313
3 – 6 Station User's Guide