Filter
Top Products
DigiTech Station User’s
Guide
GCA70-280
l
To respond verbally,
1.
Press and hold MUTE,
2. speak into handset.
l
To respond non-verbally,
1.
press pre-programmed button (see page 16 of this manual for further
instructions on programming this function).
NOTE: Announcing stafon must have LCD speakerphone.
. To Block SOHVA,
NOTE: You may block SOHVA only if your telephone is programmed for you to
do so.
1.
lift handset,
2. press ITCM and dial +K 2,
3. turn
SOHVA
back on by lifting the handset, pressing
ITCM,
and
dialing W 2.
Making Calls
l
To make a call,
1.
fii handset, select line (unless your telephone selects it for you), or
select intercom: and listen for dial tone,
2. either dial number, or press
HOLD
then, press autodial, use speed
dial feature, use redial feature, or press Direct Station Select (DSS)
if making an Intercom call.
l
To dial autodial number,
1.
press preprogrammed button. If button is programmed at the second
level of a DSS button, press
HOLD
before pressing autodial button,
2.
when called party answers, lfft handset.
l
To dial personal or system speed dial number,
1.
dial desired code:
1-O
= personal spaed dial number,
+klO
-*99 = system speed dial number,
if you select a line, press
HOLD
then dial code,
2.
when called party answers, Ml handset.
l
To redial the last number that you dialed at your
telephone,
1.
lift handset and dial #,
if you select a line, press
HOLD
then dial #,
2. when called party answers, lift handset.