Filter
Top Products
11
Operation
• While the number is flashing, press the
up or down arrow buttons until you
reach the desired channel.
• Press the MENU (Channel Set) button
again to set the channel.
If you do not press MENU the second time, The
unit will automatically return to normal operation
in ten seconds.
Frequencies
Other FRS radio models may have only 2 channels.
If you want to communicate with these units, you
must set the channels as follows:
22-ch radios Frequency 2-ch radios
Chan 8 467.5625 MHz Chan 1
Chan 12 467.6625 MHz Chan 2
To speak to Another Radio
• Turn the volume up to an audible level.
• Press and hold the TALK button on the
left side of the unit. The signal trans-
mitting waves on the LCD display will
appear.
• While pressing on the talk button, speak
into the microphone with your mouth 2 to
3 inches from the unit.
• When you finish speaking, release the
TALK button immediately to hear the
response.
Range
SCAN
CALL
LOCK
UP
DN
MENU
SCAN
CA LL
LOCK
UP
DN
MENU
SCAN
CA LL
LOCK
UP
DN
MENU