Filter
Top Products
Customer Assistance WarrantyIntroduction
15
Nothing Comes Close to a Cobra
®
Operation
14
English
Mode Functions
Operation
7. Choose one of the following:
a. Press the Hi•Low/Enter button to enter
the channel/privacy code in the selected
memory location and return to Step 1
to program another memory location.
b. Press the Lock/Mode button to
enter the channel/privacy code in
the selected memory location and
proceed to other functions on the
channel/privacy code displayed
before you entered mode functions.
c. Press the Talk button to enter the
channel/privacy code in the selected
memory location and exit mode functions.
Upon release of the
Talk button, the
radio will enter
Standby mode on the
channel/privacy code just entered.
To recall a stored memory channel location:
1.
Press the Lock/Mode button until the Memory
icon and the memory location number flash
on the display.
2. Press the Channel Up or Channel Down
button to select a memory location
(0 through 9).
If a location has been programmed
before, its associated channel/privacy
code will be shown on the display.
3. Press the Talk button to return to Standby
mode on the selected memory location.
A memory location can be reprogrammed
at any time it is displayed. Press the
Hi•Low/Enter button to begin.
While recalling a stored memory location, if you
do not press any buttons for 15 seconds, your
radio will automatically return to Standby mode
on the channel/privacy code displayed before
you entered mode functions.
To de-program a memory location:
1.
Press the Lock/Mode button until the
Memory icon and the memory location
flash on the display.
2. Press the Channel Up or Channel Down
button to select the memory location
(0 through 9).
If a location has been programmed
before, its associated channel/privacy
code will be shown on the display.
3. Press the Hi•Low/Enter button. The channel
numbers will flash on the display.
4. Press the Channel Up or Channel Down
button to select Channel 0.
5. Choose one of the following:
a. Press the Hi•Low/Enter button to enter
the channel/privacy code in the selected
memory location and return to the
beginning of memory location options.
b. Press the Lock/Mode button to
enter the channel/privacy code in
the selected memory location and
proceed to other functions on the
channel/privacy code displayed
before you entered mode functions.
While de-programming a memory location,
if you do not press any buttons for 15 seconds,
your radio will automatically return to
Standby
mode on the channel/privacy code displayed
before you entered mode functions.
Hi•Low/Enter Button
Memory Icon
Lock/Mode Button
Channel Buttons
Channel 0
Memory Icon
Lock/Mode Button
Channel Buttons