Cobra Electronics PR4700WX Two-Way Radio User Manual


 
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Customer Assistance WarrantyIntroduction
5
Nothing comes close to a Cobra
®
Operation
Intro Operation Customer
Assistance
Warranty
Notice
M
ain Icons
Secondary Icons
4
English
Using Your Radio
Volume
To adjust the volume:
1. Rotate the On/Off Volume knob.
Call Button
To alert another person that you are calling:
1. Press and release the Call button.
The other person will hear a two second
call tone. This tone is used only to establish
voice communications.
See page 23 on how to select from
10 available call tone settings.
Selectable High•Low Power Output
When in close proximity to another party or
during favorable conditions, you can switch
from
High to Low Power to extend battery life.
This feature applies to GMRS Channels
1 through 7 and 15 through 22 only.
Channels 8 through 14 operate
exclusively on low power.
To toggle between high and low power:
1. Press and hold the Hi•Low/Enter button for
two seconds.
When using Channels 1 through 7 and
15 through 22 on high power, the
Hi icon
will be visible on the display
.
When using those channels on low power
and on Channels 8 through 14, the
Low icon
will be visible on the display.
Display Illumination
To illuminate your display:
1. Press and release the Light/Max Range
button to illuminate the display for
10 seconds.
Low Power Icon
Hi Power Icon
Operation
Intro Operation Customer
Assistance
Warranty
Notice
M
ain Icons
Secondary Icons
Hi•Low/Enter Button
Auto Squelch/Maximum Range
Your microTALK
®
radio is equipped with Auto Squelch, which
automatically shuts
off weak transmissions and unwanted noise
due to terrain and conditions. This slightly reduces the
Maximum
Range
at which signals can be heard.
You can turn off auto squelch to allow all signals to be
received and extend the maximum range of your radio.
To briefly turn off auto squelch:
1. Press the Light/Max Range button
for less than five seconds.
If you hear two beeps, you have turned
the maximum range extender
on (see below).
To turn maximum range extender on:
1. Press and hold the Light/Max Range button
for at least five seconds until you hear
two beeps which indicates the maximum
range extender is
on.
To turn maximum range extender off:
1. Press and release the Light/Max Range
button or change channels.
Lock Feature
The Lock feature locks the Channel, Lock/Mode and Hi•Low
Power/Enter
buttons to prevent accidental operation.
To turn the lock feature on or off:
1. Press and hold the Lock/Mode button for
two seconds.
A double beep sound is used to confirm your
lock
on or off request. When in Lock mode,
the
Lock icon will be displayed.
Light/Max Rang
e
Light/Max Range
Lock/Mode Button
Lock Mode
Volume Knob
Call Button
Intro Operation Customer
Assistance
Warranty
N
otice
M
ain Icons
Secondary Icons
C
aution Warning
Installation
C
ustomer
Assistance