Filter
Top Products
MMooddee//LLoocckk BBuuttttoonn
RReedduucceedd RRaannggee
RReedduucceedd RRaannggee
MMaaxxiimmuumm RRaannggee
Customer Assistance WarrantyIntroduction
99
NNootthhiinngg
Comes Close to a Cobra
®
OOppeerraattiioonn
88
EEnngglliisshh
MMooddee FFuunnccttiioonnss
microTALK
®
Range
••
Your range will vary depending on terrain and conditions.
In flat, open country your radio will
operate at maximum range.
Buildings and foliage in the path of the
signal can reduce the range of the radio.
Dense foliage and hilly terrain will
further reduce the range of the radio.
On FRS channels 8 through 14, your radio
automatically switches to low power, which
will limit the range the radio can communicate.
Remember, you can achieve maximum
range by using maximum range
extender. See page 6 for details.
Scrolling through Mode Functions
••
By scrolling through the Mode Functions, you will be able to
select or turn on/off preferred features of your microTALK
®
radio.
When scrolling through the Mode Functions, your radio features
will be displayed in the following order:
Set Privacy Codes
Set NOAA All Hazards Radio Channel
Set VOX On/Off
Set VOX Sensitivity Level
Set Memory Locations
Set Channel Scan
Set Privacy Code Scan
Set Memory Location Scan
Set Call Tones
Set Roger Beep On/Off
Set Keystroke Tones On/Off
Scroll through the mode functions using the Mode/Lock button.
Each press and release of the Mode/Lock button will advance to
the next mode function. Press the Talk button at any point to
return the radio to Standby mode.
OOppeerraattiioonn
CTCSS Privacy Codes
••
CTCSS (Continuous Tone Coded Squelch System) is an advanced
tone coding system allowing you to select one of 38 privacy codes
to reduce interference from other users on the channel.
If you are using a privacy code, both radios must
be tuned to the same channel and privacy code to
communicate. Each channel will remember the
last privacy code you selected.
To select a privacy code:
1. After selecting a channel, press
the Mode/Lock button until the small
numbers next to the channel number
flash on the display.
2. Press using the Channel Up or Channel Down
button to select a privacy code. You can hold
the Up or Down button for fast advance.
3. When your desired privacy code is displayed,
choose one of the following:
a. Press the Mode/Lock button to enter the
new setting and proceed to other functions.
b. Press the Enter/Hi•Low button to enter the
new setting and return to Standby mode.
c. Do not press any buttons for 15 seconds
to enter the new setting and return to
Standby mode.
MMooddee//LLoocckk BBuuttttoonn
CChhaannnneell BBuuttttoonnss
PPrriivvaaccyy CCooddee