Filter
Top Products
Operation Warranty
Operation Customer Assistance Warranty
21
Nothing comes close to a Cobra
®
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Introduction
20
English
Mode Functions and
General Specifications
General Specifications
•
FRS/GMRS Frequency
Allocation and Compatibility
Important: Please note that Cobra GMRS models with 15 Channels may
designate different channel numbers for the same frequency.For example,
a Cobra15 Channel GMRS model would need to be tuned to Channel 11
in order to communicate with a 22 Channel GMRS tuned to Channel 15.
Please refer to the chart below for channel/frequency number compatibility.
A = Channel No.for 22 Channel FRS/GMRS Models
B = Channel No.for 15 Channel GMRS Models
C = Type of Radio Service
D = Frequency in MHz
ABC D
1 1 FRS/GMRS 462.5625
2 2 FRS/GMRS 462.5875
3 3 FRS/GMRS 462.6125
4 4 FRS/GMRS 462.6375
5 5 FRS/GMRS 462.6625
6 6 FRS/GMRS 462.6875
7 7 FRS/GMRS 462.7125
8 FRS 467.5625
9 FRS 467.5875
10 FRS 467.6125
11 FRS 467.6375
12 FRS 467.6625
13 FRS 467.6875
14 FRS 467.7125
15 11 GMRS 462.5500
16 8 GMRS 462.5750
17 12 GMRS 462.6000
18 9 GMRS 462.6250
19 13 GMRS 462.6500
20 10 GMRS 462.6750
21 14 GMRS 462.7000
22 15 GMRS 462.7250
Operation
Intro Operation Customer
Assistance
Warranty
Notice
M
ain Icons
Secondary Icons
Roger Beep Confirmation Tone
•
Roger Beep is an audible tone that your listener will hear when you
release the
Talk button. This alerts the other party that you are
finished talking and it is OK for them to speak.
To turn roger beep on or off:
1. Press the Mode button until the Roger Beep
icon flashes on the display. The current on
or off setting is displayed.
2. Press the Channel Up or Channel Down
button to select roger beep on or off.
3. Choose one of the following:
a. Press the Mode/Lock button to enter
the new setting and proceed to other
functions.
b. Press the Enter/Hi•Low button to enter the
new setting and return to
Standby mode.
Keystroke Tones
•
With Keystroke Tones turned on, your radio will sound
beeps each time you press a button or change a setting.
To change keystroke tones:
1. Press the Mode/Lock button until the
Keystroke Tones icon flashes on the display.
The current
on or off setting is displayed.
2. Press the Channel Up or Channel Down
button to turn keystroke tones on or off.
3. Choose one of the following:
a. Press the Mode/Lock button to enter the
new setting and return to
Standby mode.
b. Press the Enter/Hi•Low button to enter the
new setting and return to
Standby mode.
Mode/Lock Button
Keystroke Tones On
Channel Buttons
Mode/Lock Button
Roger Beep On
Channel Buttons