Filter
Top Products
Customer Assistance WarrantyIntroduction
OOppeerraattiioonn
Privacy Code Scan
••
Your microTALK
®
radio can automatically scan the Privacy Codes
(00 through 38) within one channel.
To scan privacy codes:
1. While in Standby mode, press the
Channel Up or Channel Down button
to choose the channel on which you
wish to scan privacy codes.
2. Press the Mode/Power button until
the Scan icon and the privacy code
numbers appear on the display.
3. Press the Channel Up or Channel Down
button to begin scanning privacy codes
within the channel you selected.
The Scan icon will continue to be displayed
when privacy code scan is on. Your radio will
continue to scan privacy codes and stop as an
incoming transmission is detected. Your radio
will remain on that channel/privacy code for
10 seconds.
While setting privacy code scan, if you do not
press any buttons for 15 seconds your radio
will automatically return to Standby mode on
the channel/privacy code that was displayed
before you entered mode functions.
MMooddee FFuunnccttiioonnss
During scanning (while receiving an incoming transmission),
you can choose from the following:
a. Press and hold the Talk button to communicate on
that channel. Your radio will remain on that channel
and return to Standby mode.
b. Press the Channel Up or Channel Down button to
resume scanning channels.
If you press the Talk button while scanning and not within
10 seconds of receiving a transmission, you will transmit
on the channel on which you last received a transmission.
This will return the radio to Standby mode.
If you do not press any button within 10 seconds,
your radio will automatically resume scanning channels.
During scanning (while not receiving a transmission),
you can choose from the following:
a. Press and hold the Talk button to communicate on the
channel or channel/privacy code that was displayed before
you entered mode functions or the channel on which,
during scanning, you last received a transmission.
This will return the radio to Standby mode.
b. Press the Mode/Power button to proceed to set privacy
code scan on the channel that was either displayed before
you entered mode functions or on which, during channel
scanning, you last received a transmission (see page 11
for further details).
c. Press the Lock button to return to Standby mode on the
channel/privacy code that was displayed before you entered
mode functions or the channel on which, during scanning,
you last transmitted or received.
CChhaannnneell BBuuttttoonn
MMooddee//PPoowweerr BBuuttttoonn
SSeelleecctt CChhaannnneell
SSccaann PPrriivvaaccyy CCooddeess
EEnngglliisshh
1100
1111
NNootthhiinngg
Comes Close to a Cobra
®
OOppeerraattiioonn
MMooddee FFuunnccttiioonnss
9627-PR255-2VP-C English-1 3/29/06 3:32 PM Page 10