Filter
Top Products
Auto Squelch/Maximum Range
••
Your microTALK
®
radio is equipped with Auto Squelch,
which automatically shuts off weak transmissions and
unwanted noise due to terrain, conditions or if you’ve
reached your Maximum Range limit.
You can temporarily turn off auto squelch or turn on
maximum range extender, allowing all signals to be
received and extending the maximum range of your radio.
To temporarily turn off auto squelch:
– Press the Light/Max Range button for
less than five seconds.
If you hear two beeps, you have turned
the maximum range extender on (see below).
To turn maximum range extender on:
– Press and hold the Light/Max Range button
for at least five seconds until you hear
two beeps which indicates the maximum
range extender is on.
To turn maximum range extender off:
– Press and release the Light/Max Range
button or change channels.
Lock Function
••
The Lock function locks the Channel Up, Channel Down and Mode
buttons to prevent accidental operation.
To turn the lock on or off:
– Press and hold the Lock button for
two seconds.
A double beep sound is used to confirm your
lock on or off request. When in Lock mode,
the Lock icon will be displayed.
Customer Assistance WarrantyIntroduction
OOppeerraattiioonn
LLoocckk IIccoonn
LLoocckk BBuuttttoonn
LLiigghhtt//MMaaxx RRaannggee
UUssiinngg YYoouurr RRaaddiioo
OOppeerraattiioonn
Listening for a Response
••
When you are finished talking:
– Release the Talk button to receive incoming
transmissions. Your microTALK
®
radio is
always in Standby mode while the Talk
or Call buttons are not pressed.
Volume
••
To adjust the volume:
– Press the Volume Up or Volume
Down button.
A double beep sound is used to indicate
the minimum and maximum volume levels
(1 through 8).
Call Button
••
To alert another person that you are calling:
– Press and release the Call button.
The other person will hear a two second call
tone. This tone is used only to establish voice
communications.
See page 13 on how to select between
five call tone settings.
Display Illumination
••
To illuminate your display:
– Press and release the Light/Max Range button
to illuminate the display for 10 seconds.
LLiigghhtt//MMaaxx RRaannggee
LLiisstteenniinngg
CCaallll BBuuttttoonn
VVoolluummee BBuuttttoonn
VVoolluummee LLeevveell
EEnngglliisshh
44
55
NNootthhiinngg
Comes Close to a Cobra
®
9627-PR255-2VP-C English-1 3/29/06 3:32 PM Page 4