Customer Assistance WarrantyIntroduction Operation
General Specifications
•
Nominal
Unit
Nominal
Unit
C.Transmitter
1. Power
GMRS . . . . . . . . . . . . . . . . . . . .W 1
FRS Only . . . . . . . . . . . . . . . . .mW 500
2. Carrier Frequency Stability . . . ±Hz 500
3. Modulation Limiting . . . . . . . . kHz 2.5
4. Carrier Attack Time . . . . . . . . . mS 80
5. Audio Frequency Response
@ 300 Hz . . . . . . . . . . . . . . . . . dB -12
@ 2500 Hz . . . . . . . . . . . . . . . . dB +6
6. Audio Distortion
. . . . . . . . . . . .
%
3
7. Hum Noise . . . . . . . . . . . . . . . .dB 30
8.
T
ransient Frequency Behavior
a) TX On
. . . . . . . . . . . . . . . . .
mS
30
b) TX Off . . . . . . . . . . . . . . . . . mS 5
A. FRS/GMRS
Frequency
Allocation and
Compatibility
Important: Please note that Cobra
®
GMRS models with 15 Channels may
designate different channel numbers for
the same frequency.For example, a
Cobra
®
15 Channel GMRS model would
need to be tuned to Channel 11 in order
to comm
unicate with a 22 Channel GMRS
tuned to Channel 15.Please refer to the
chart below for channel/frequency
number compatibility.
A = Channel No.For
22 Channel GMRS Models
B = Channel No.For 15 Channel
GMRS Models
C = Type of Radio Service
D = Frequency in MHz
E = Power in Watts
ABC D E
1 1 FRS/GMRS 462.5625 1.0
2 2 FRS/GMRS 462.5875 1.0
3 3 FRS/GMRS 462.6125 1.0
4 4 FRS/GMRS 462.6375 1.0
5 5 FRS/GMRS 462.6625 1.0
6 6 FRS/GMRS 462.6875 1.0
7 7 FRS/GMRS 462.7125 1.0
8 FRS 467.5625 0.5
9
FRS 467.5875 0.5
10
FRS 467.6125 0.5
11 FRS 467.6375 0.5
12 FRS 467.6625 0.5
13 FRS 467.6875 0.5
14 FRS 467.7125 0.5
15
11
GMRS
462.5500
1.0
16
8
GMRS
462.5750
1.0
17
12 GMRS 462.6000 1.0
18
9 GMRS 462.6250 1.0
19
13
GMRS 462.6500 1.0
20
10
GMRS
462.6750
1.0
21 14 GMRS 462.7000 1.0
22 15 GMRS 462.7250 1.0
B. Receiver
1. Sensitivity
For 12 dB SINAD . . . . . . . . . . dBm -121
For Call Signal Detection . . . . dBm -121
2. Max. Audio Output
@ 10% THD . . . . . . . . . . . . . . mW 200
3. Max. S/N Ratio
@ 1mV RF Input . . . . . . . . . . . dB 50
4. Squelch
a) Sensitivity . . . . . . . . . . . . . . dBm -121
b) Attack Time . . . . . . . . . . . . . mS 150
c) Closing Time . . . . . . . . . . . . mS 200
5. Audio Frequency Response
@ 300 Hz . . . . . . . . . . . . . . . . . dB -10
@ 2500 Hz . . . . . . . . . . . . . . . . dB -10
6. Signal Displacement BW . . . . +/-kHz 5
7. Adjacent Channel Rejection . . . dB 40
8. Intermodulation Rejection . . . . dB 65
9. Spurious Response Rejection . dB 55
D. Power Supply
1. Battery Life (5:5:90 RATIO)
With Alkaline Batteries . . . . . . . HR 24
2. Battery Operating Range . . . . . . V 4.2 - 6.0
Nominal
Unit
Mode Functions
Operation
Five (5) Call Tone Settings
•
You can choose between five (5) different Call Tone Settings to
transmit a unique call alert.
To Change A Call Tone Setting:
1. Press the Mode/Power button until the
letter “C” and the current call tone number
(01 through 05) is displayed. The current
call tone will sound for one (1) second.
2. Press the
Channel Up or Channel Down
button to hear the other call tone settings.
3. Choose one (1) of the following:
a. Press the
Mode/Power button to
enter the new setting and proceed
to other functions.
b. Press the
Lock button to enter the new
setting and return to
Standby mode.
Roger Beep Confirmation Tone
•
Your listener will hear an audible tone when you release the
Talk button. This alerts the other party that you are finished
talking and it is OK for them to speak.
To Turn Roger Beep On Or Off:
1. Press the Mode/Power button until the
Roger Beep icon flashes. The current
On or Off setting is displayed.
2. Press the Channel Up or Channel Down
button to select roger beep On or Off.
3. Choose one (1) of the following:
a. Press the
Mode/Power button to enter the
new setting and return to
Standby mode.
b. Press the
Lock button to enter the new
setting and return to
Standby mode.
Call Tone Setting
Mode/P
ower Button
Channel Button
Rog
er Beep Off
Mode/Power Button
Channel Button
English
12
13
Nothing comes close to a Cobra
®
