Filter
Top Products
Turning On Your microTALK
®
Radio
•
To Turn On Your Radio:
1. Press and hold the Power button until you
hear a series of audible tones indicating the
radio is On.
Your microTALK
®
radio is now in Standby Mode,
ready to receive transmissions. The radio is
always in
Standby Mode except when the
Talk or Call buttons are pressed.
Battery Low
•
When battery power is low, the Battery Low
icon will blink. Your batteries should be replaced
or recharged, if using rechargeable batteries.
Battery/Power Saver
•
Your microTALK
®
radio has a unique circuit
designed to extend battery life. If there are no
transmissions within ten (10) seconds, the radio
will automatically switch to
Battery Save Mode.
This will not affect the radio’s ability to receive
incoming transmissions.
Communicatingwith Another Person
•
To Talk To Another Person:
1. Press and hold the Talk button.
2. With the microphone about two (2) inches (5 cm)
from your mouth, speak in a normal voice.
3. Release the
Talk button when you are
finished talking and listen for a response.
You cannot receive incoming calls while
pressing the Talk button.
Both radios must be tuned to
the same channel to communicate.
Mode Functions
•
Press and release the Mode/Lock button to
scroll through the Mode functions. In Mode
Function, you can set Privacy Codes and
turn “Roger Beep” On or Off.
5
English
Using Your Radio
Operation
On/Off Power
Battery Low
Talk Button
Mode Button
2 inches (5 cm)
From Mouth