Filter
Top Products
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Customer Assistance WarrantyIntroduction Operation
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Mode Functions
Operation
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
To de-program a memory location:
1. Press the Mode button until the
Memory icon and the memory location
flash on the display.
2. Press the Channel Up or Channel Down button
to select the memory location
(0 through 9).
If a location has been programmed before,
its associated channel/privacy code will be
shown on the display.
3. Press the Lock/Enter button. The channel
numbers will flash on the display.
4. Press the Channel Up or Channel Down button
to select Channel 0.
5. Choose one of the following:
a. Press the Lock/Enter button to enter
the channel/privacy code in the selected
memory location and return to the beginning of
memory location options.
b. Press the Mode button to
enter the channel/privacy code in
the selected memory location and
proceed to other functions on the channel/
privacy code displayed
before you entered mode functions.
While de-programming a memory location,
if you do not press any buttons for 15 seconds, your
radio will automatically return to Standby mode
on the channel/privacy code displayed before you
entered mode functions.
To recall a stored memory channel location:
1. Press the Mode button until the Memory icon
and the memory location number flash on the
display.
2. Press the Channel Up or Channel Down button
to select a memory location
(0 through 9).
If a location has been programmed before,
its associated channel/privacy code will be
shown on the display.
3. Press the Talk button to return to Standby mode
on the selected memory location.
A memory location can be reprogrammed at
any time it is displayed and flashing. Press
the Lock/Enter button to begin.
While recalling a stored memory location,
if you do not press any buttons for 15 seconds, your
radio will automatically return to Standby mode
on the channel/privacy code displayed before you
entered mode functions.
Memory Icon
Channel 0
Mode Button
Memory Icon
Mode Button
LI 7300
Channel Button
LI 7300
Channel Button
LI 7300
Lock/Enter Button
16
English
17
Nothing Comes Close to a Cobra
®
CXR925C_ENG_MANL.indd 16-17 12/15/09 2:19 PM