Filter
Top Products
Set CB PA switch to PA position.
2
2120
Operation Operation
External Speaker
External Speaker
The external Speaker jack is used for remote
receiver monitoring.
Note
The external speaker should
have 8-ohm impedance and be
rated to handle at least 4.0
watts.When the external speak-
er is plugged in,the internal
speaker is automatically discon-
nected.
Note
Cobra external speakers are
rated at 10 watts.See
accessories page 37.
Connect an external speaker to the external
speaker jack on the rear panel.
1
PA (Public
Address)
PA (Public Address)
Connect an external PA speaker to the PA jack
on the rear panel.
Note
Speaker should have 8-ohm
impedance and be rated to
handle at least 4.0 watts.
Note
The speaker should be directed
away from the microphone to
prevent acoustic feedback.
Note
Activity on the CB channel
will be heard through the PA
speaker.Adjust Volume Control
for normal listening level.
1
25 NWST Manual3.3 6/15/99 12:43 PM Page 20