Filter
Top Products
17 – ENGLISH
TROUBLESHOOTING
If you have problems with your CSC600, please check below for
helpful hints.
No dial tone
1 Check that all phone cord connections (including the curly cord) and AC
Adapter are securely plugged into the telephone & wall jack.
2 Check that the phone is in the correct dialing mode, Touch-Tone / Pulse
Setting.
3 Plug another phone into the jack to make sure your phone service is
functioning properly.
Call will not dial or dials very slowly
1 Check that the phone is in the correct dialing mode, Touch-Tone / Pulse
Setting
No audible ringer
1 Make sure the ringer is not set to the “OFF” position
2 Check the volume level of the ringer.
3 You may have too many extensions on your line. Try unplugging a few
devices. Having too many telephones /accessories can also create
problems such as low ringer volume or impaired quality during calls.
No Strobe Ringer and/or bed shaker will not activate
1 Make sure the strobe and/or shaker switch is turned “ON”
2 Make sure the Bed Shaker is plugged in all the way.
3 Make sure the Bed Shaker is plugged into the correct jack.
No amplification
1 Check to see if the AMPLI amplify button is “ON”. The red light should
be lit.
2 Check the AC Power Adapter and make sure it is plugged into the wall
and into the appropriate jack on the phone. If necessary change the
adapter to a different outlet.
Noise, Static, Interference while using the handset
1 A filter may be required for homes with DSL line or near Radio towers.
There is a red light that continues to flash
1 You have un-reviewed Caller ID / Call Waiting information or missed a
call.
2 Your Voice Mail account needs to be set-up as Visual Indicator only.
Contact your local phone company; if the account is setup as Audible or